Job description for an engineer for technical supervision of construction. Technical supervision engineer job description Job responsibilities of construction supervision

Hello friends! Previously, there was a concept in construction as "technical supervision". In everyday life, of course, he still remained, but in the legislation you will no longer meet him. Currently, "technical supervision" are engineers for building control. This article will be about them.

The foundations of building control are laid down in Article 53 of the Town Planning Code Russian Federation:

purpose of construction control
by whom is carried out
What does the construction control procedure include?

But this article lays only the foundations, specifically the procedure itself is prescribed in the Regulations on the conduct of construction control during construction, reconstruction and overhaul objects capital construction(approved by Decree of the Government of the Russian Federation of June 21, 2010 N 468).

Also, building control is spelled out in SP 48.13330.2011 "Organization of construction".

Purpose and subject of construction control

The purpose of building control is spelled out in Part 1 of Art. 53 GK RF:

The subject of construction control is specified in the regulation on the procedure for conducting construction control:

Who is responsible for building supervision?

According to part 2 of Art. 53 construction control is carried out by the person carrying out the construction. In cases where construction is carried out on the basis of a contract, that is, the developer and the person carrying out the construction are different persons, construction control must also be carried out by the developer.

In this case, the developer can carry out control on its own, or hire an organization for this under a contract. You can hire the same person who carries out the construction.

Requirements for a building control specialist

Minimum requirements: the specialist must have the appropriate education, advanced training every 5 years and a qualification certificate for compliance with the position held.

What does the construction control procedure include?

The construction control of the person carrying out the construction (contractor) and the developer are slightly different.

It turns out that the construction control of the developer is to check the maintenance of the construction control of the contractor.

Organization of construction control

For this you need:

Assign the responsible engineer(s) by appropriate order. Familiarize him (them) with the order. These specialists must meet the established requirements. It is desirable to be included unified register construction specialists.
Enter the data of construction control specialists in title pages general work log.

Do not forget to subscribe to the blog and share the article on social networks. Thank you.

P.p.s. Friends, I also want to recommend you "Generator and additional documentation - Generator-ID" from the site ispolnitelnaya.com. The program is so simple and effective that it will save a lot of time. I advise everyone to take a look!!!

1. GENERAL PROVISIONS

1.1. This job description defines the functional duties, rights and responsibilities of the Construction Supervision Engineer.

1.2. The construction supervision engineer is appointed to the position and dismissed from the position in accordance with the procedure established by the current labor legislation by order of the director of the enterprise.

1.3. The Construction Supervision Engineer reports directly to _____________________.

1.4. A person who has:

Category I construction supervision engineer: higher professional (technical) education and work experience as a category II construction supervision engineer for at least 3 years;

Category II Construction Supervision Engineer: higher professional (technical) education and work experience as a Construction Supervision Engineer or other engineering and technical positions filled by specialists with higher professional education, at least 3 years;

Construction Supervision Engineer: higher professional (technical) education without requirements for work experience or secondary vocational education and work experience as a technician of category I or other engineering and technical positions occupied by specialists with secondary vocational education, at least 5 years.

1.5. The construction supervision engineer must know:

Decrees, orders, orders, methodological and regulatory materials for the implementation of construction and installation works;

Prospects for the technical development of the enterprise;

Technical conditions and schedules for the implementation of construction and installation works;

Standards, specifications for building materials, parts, structures;

Building regulations;

Basics of production technology and methods of conducting construction and installation works;

The procedure for acceptance of objects completed by construction, and methods for controlling their quality;

The procedure for issuing design estimates and other technical documentation;

Advanced domestic and foreign experience in construction and installation works;

New building materials, products, structures;

Fundamentals of economics, organization of production, labor and management;

Fundamentals of legislation on environmental protection;

Basics of labor legislation;

Rules and norms of labor protection.

1.6. During the period of temporary absence of the Construction Supervision Engineer, his duties are assigned to _______________________.

2. FUNCTIONAL RESPONSIBILITIES

2.1. Functional responsibilities Construction Supervision Engineers are determined on the basis and to the extent of the qualification characteristics for the position of Construction Supervision Engineer and can be supplemented, clarified when preparing the job description based on specific circumstances.

2.2. Construction supervision engineer:

2.2.1. Carries out on behalf of the customer technical supervision over the implementation of construction and installation works and acceptance of completed objects from contracting construction organizations.

2.2.2. Controls the progress of implementation of capital construction plans, compliance of the volumes, terms and quality of construction and installation works, as well as the quality of the materials, products, structures used, approved design and estimate documentation with working drawings, building codes and rules, standards, technical conditions, labor protection standards.

2.2.3. Participates in resolving issues on introducing changes to projects in connection with the introduction of more progressive technological processes, space-planning and design solutions that reduce costs and improve the technical and economic indicators of construction and reconstruction facilities.

2.2.4. Participates in the review and approval of changes in design decisions that arise during construction, promptly resolves issues of replacing, if necessary, materials, products, structures (without reducing the quality of construction objects). Examines the reasons causing delays and deterioration in the quality of construction and installation works, takes measures to prevent and eliminate them.

2.2.5. Carries out technical acceptance of completed construction and installation works and objects, draws up the necessary technical documentation.

2.2.6. Participates in the work of commissions for the acceptance of construction projects and their commissioning.

2.2.7. Controls the quality of elimination of imperfections and defects by construction organizations within the time limits established by the commission.

2.2.8. Keeps records of completed construction and installation works and prepares the necessary data for reporting on the implementation of capital construction plans.

3. RIGHTS

3.1. The construction supervision engineer has the right to:

3.1.1. Control the progress of implementation of plans for capital construction, compliance with the volumes, terms and quality of construction and installation works, the quality of the materials, products, structures used in the approved design and estimate documentation with working drawings, building codes, rules and standards.

3.1.2. Carry out technical acceptance of construction and installation works and objects, draw up the necessary technical documentation.

3.1.3. To control the quality of elimination of imperfections and defects by construction organizations within the period established by the commission.

4. RESPONSIBILITY

4.1. The Construction Supervision Engineer is responsible for:

4.1.1. Failure to fulfill their functional duties.

4.1.2. Inaccurate information about the status of the received tasks and instructions, violation of the deadlines for their execution.

4.1.3. Failure to comply with orders, orders of the director of the enterprise, instructions and tasks of the head of the department.

4.1.4. Violation of the Internal Labor Regulations, fire safety and safety regulations established at the enterprise.

5. WORKING CONDITIONS

5.1. The work schedule of the Construction Supervision Engineer is determined in accordance with the Internal Labor Regulations established at the enterprise.

5.2. In connection with the production need, the Construction Supervision Engineer may be sent on business trips (including local ones).

Other instructions in the section:

Construction Control Engineer

Job Responsibilities. Carries out on behalf of the customer construction control over the implementation of construction and installation works and acceptance of completed objects from contracting construction organizations. Controls the progress of implementation of capital construction plans, compliance with the volume, timing and quality of construction and installation works, as well as the quality of materials, products, structures used, approved design and estimate documentation, working drawings, building codes and rules, standards, specifications, labor protection rules . Participates in resolving issues on introducing changes to projects in connection with the introduction of more progressive technological processes, space-planning and design solutions that reduce costs and improve the technical and economic indicators of construction and reconstruction facilities. Takes part in the review and approval of changes in design decisions that arise during construction, resolves issues of replacing materials, products, structures, if necessary (without reducing the quality of construction objects). Examines the reasons causing delays and deterioration in the quality of construction and installation works, takes measures to prevent and eliminate them. Carries out technical acceptance of completed construction and installation works and objects, draws up the necessary technical documentation. Participates in the work of commissions for the acceptance of construction projects and their commissioning. Controls the quality of elimination of imperfections and defects by construction organizations in a timely manner. Keeps records of completed construction and installation works and prepares the necessary data for reporting on the implementation of capital construction plans.

Must know: laws and other regulatory legal acts of the Russian Federation in the field of urban planning; administrative, methodological and regulations for the implementation of construction and installation works; prospects for the technical development of the organization; technical conditions and schedules for the implementation of construction and installation works; standards, specifications for building materials, parts, structures; building regulations; basics of production technology and methods of conducting construction and installation works; the procedure for acceptance of objects completed by construction, and methods for controlling their quality; the procedure for issuing design estimates and other technical documentation; advanced domestic and Foreign experience performance of construction and installation works; types of new building materials, products, structures; fundamentals of economics, organization of production, labor and management; fundamentals of legislation on environmental protection; fundamentals of labor legislation; labor protection rules.

Qualification requirements.

Category I construction control engineer - higher professional education in the specialty "Construction", "Industrial and civil construction" and professional retraining in the direction "State construction supervision and construction control"; at least 3 years of work experience as an engineer for construction supervision of II category; advanced training at least once every 5 years and the availability of qualification certificate in accordance with the position held.

Category II construction control engineer - higher professional education in the specialty "Construction", "Industrial and civil construction" and professional retraining in the direction "State construction supervision and construction control"; At least 2 years of work experience as a construction control engineer; advanced training at least once every 5 years and the availability of a qualification certificate for compliance with the position held.

Construction control engineer - higher professional education in the specialty "Construction", "Industrial and civil construction" without presenting requirements for work experience; advanced training at least once every 5 years and the availability of a qualification certificate for compliance with the position held and a certificate of conformity of a specialist or secondary vocational technical education and work experience in the position of a technician of category I or in other engineering and technical positions replaced by specialists with secondary vocational education, not less than 5 years; advanced training at least once every 5 years and the availability of a qualification certificate for compliance with the position held.

Download the full version of this manual + familiarization sheet and change form1. General provisions

1.1. The construction control engineer belongs to the category of specialists.

1.2. A person who has a higher professional education in the specialty "Construction", "Industrial and civil construction" without presenting requirements for work experience is appointed to the position of a construction control engineer. qualifications of a specialist or secondary vocational technical education and work experience as a technician of category I or in other engineering and technical positions occupied by specialists with secondary vocational education, at least 5 years positions.

Category I construction control engineer - higher professional education in the specialty "Construction", "Industrial and civil construction" and professional retraining in the direction of "State construction supervision and construction control" work experience as an engineer for construction supervision category II for at least 3 years advanced training at least once every 5 years and the availability of a qualification certificate for compliance with the position held.

Category II construction control engineer - higher professional education in the specialty "Construction", "Industrial and civil construction" and professional retraining in the direction "State construction supervision and construction control" work experience as a construction control engineer at least 2 years less than once every 5 years and the availability of a qualification certificate for compliance with the position held.

1.3. Appointment to the position of a construction control engineer and dismissal from it is carried out

___________________________________________________________________________________

(director of the enterprise, other official)

1.4. During the absence of an employee, his duties are performed by a person appointed in the prescribed manner.

1.5. The building control engineer must know:

1.5.1. resolutions, orders, orders, other governing and regulatory documents of higher and other bodies relating to the production and economic activities of the enterprise

1.5.2. labor legislation of the Russian Federation

1.5.3. internal labor regulations

1.5.4. labor protection, safety regulations

1.5.5. laws and other regulatory legal acts of the Russian Federation in the field of urban planning

1.5.6. administrative, methodological and regulatory documents for the implementation of construction and installation works

1.5.7. prospects for the technical development of the organization

1.5.8. technical conditions and schedules for construction and installation works

1.5.9. standards, specifications for building materials, parts, structures

2. Job responsibilities

2.1. Carries out on behalf of the customer construction control over the implementation of construction and installation works and acceptance of completed objects from contracting construction organizations.

2.2. Controls the progress of implementation of capital construction plans, compliance with the volume, timing and quality of construction and installation works, as well as the quality of materials, products, structures used, approved design and estimate documentation, working drawings, building codes and rules, standards, specifications, labor protection rules .

The building control engineer has the right to:

3.1. A workplace that meets the state regulatory requirements for labor protection and the conditions concluded by the contract.

APPROVE:

[Job title]

_______________________________

[Name of company]

_______________________________

_______________________/[FULL NAME.]/

"______" _______________ 20___

JOB DESCRIPTION

building control engineer

1. General Provisions

1.1. This job description defines and regulates the powers, functional and job duties, rights and responsibilities of a construction control engineer [Name of organization in the genitive case] (hereinafter referred to as the Company).

1.2. The construction control engineer belongs to the category of specialists, is appointed to the position and dismissed from the position in accordance with the procedure established by the current labor legislation by order of the head of the Company.

1.3. The Construction Control Engineer reports directly to [title of immediate supervisor in the dative case] to the Company.

1.4. A person with the appropriate qualifications is appointed to the position of a construction control engineer:

Construction control engineer of the 1st category:

at least 3 years of work experience as an engineer for construction supervision of II category;

Construction control engineer II category:

higher professional education in the specialty "Construction", "Industrial and civil construction" and professional retraining in the direction "State construction supervision and construction control";
At least 2 years of work experience as a construction control engineer;
advanced training at least once every 5 years and the availability of a qualification certificate for compliance with the position held.

Construction Control Engineer:

higher professional education in the specialty "Construction", "Industrial and civil construction" without presenting requirements for work experience;
advanced training at least once every 5 years and the availability of a qualification certificate for compliance with the position held and a certificate of conformity of a specialist or secondary vocational technical education and work experience in the position of a technician of category I or in other engineering and technical positions replaced by specialists with secondary vocational education, not less than 5 years;
advanced training at least once every 5 years and the availability of a qualification certificate for compliance with the position held.

1.5. The building control engineer must know:

laws and other regulatory legal acts of the Russian Federation in the field of urban planning;
administrative, methodological and regulatory documents for the implementation of construction and installation works;
prospects for the technical development of the organization;
technical conditions and schedules for the implementation of construction and installation works;
standards, specifications for building materials, parts, structures;
building regulations;
basics of production technology and methods of conducting construction and installation works;
the procedure for acceptance of objects completed by construction, and methods for controlling their quality;
the procedure for issuing design estimates and other technical documentation;
advanced domestic and foreign experience in construction and installation works;
types of new building materials, products, designs;
fundamentals of economics, organization of production, labor and management;
fundamentals of legislation on environmental protection;
fundamentals of labor legislation;
labor protection rules.

1.6. The construction control engineer in his work is guided by:

requirements of the legislation of the Russian Federation;
local acts and organizational and administrative documents of the Company;
internal labor regulations;
rules of labor protection and safety, ensuring industrial sanitation and fire protection;
instructions, orders, decisions and instructions of the immediate supervisor;
this job description.

1.7. During the period of temporary absence of the construction control engineer, his duties are assigned to [deputy position].

2. Job responsibilities

The construction control engineer is required to perform the following labor functions:

2.3. Participates in resolving issues on introducing changes to projects in connection with the introduction of more progressive technological processes, space-planning and design solutions that reduce costs and improve the technical and economic indicators of construction and reconstruction facilities.

2.4. Takes part in the review and approval of changes in design decisions that arise during construction, resolves issues of replacing materials, products, structures, if necessary (without reducing the quality of construction objects).

2.5. Examines the reasons causing delays and deterioration in the quality of construction and installation works, takes measures to prevent and eliminate them.

2.6. Carries out technical acceptance of completed construction and installation works and objects, draws up the necessary technical documentation.

2.7. Participates in the work of commissions for the acceptance of construction projects and their commissioning.

2.8. Controls the quality of elimination of imperfections and defects by construction organizations in a timely manner.

2.9. Keeps records of completed construction and installation works and prepares the necessary data for reporting on the implementation of capital construction plans.

In case of official necessity, a construction control engineer may be involved in the performance of his official duties overtime, by decision of the Deputy Director for Production, in the manner prescribed by law.

3. Rights

The building control engineer has the right to:

3.1. Get acquainted with the draft decisions of the Company's management relating to its activities.

3.2. Submit proposals for improvement of the work related to the responsibilities provided for in this instruction for consideration by the management.

3.3. Within the limits of his competence, report to his immediate supervisor about all the shortcomings identified in the course of his activities and make proposals for their elimination.

3.4. Request personally or on behalf of the Company's management from the organization's divisions and other specialists information and documents necessary for the performance of their duties.

3.5. Involve specialists from all (individual) structural divisions in solving the tasks assigned to him.

3.6. Require the management of the organization to assist in the performance of their duties.

4. Responsibility

The construction control engineer bears administrative, disciplinary and material (and in some cases provided for by the legislation of the Russian Federation - and criminal) responsibility for:

4.1. Non-fulfillment or improper fulfillment of official instructions of the immediate supervisor.

4.2. Failure to perform or improper performance of their labor functions and assigned tasks.

4.3. Unlawful use of the granted official powers, as well as their use for personal purposes.

4.4. Inaccurate information about the status of the work entrusted to him.

4.5. Failure to take measures to suppress the identified violations of safety regulations, fire and other rules that pose a threat to the activities of the enterprise and its employees.

4.6. Failure to enforce labor discipline.

5. Working conditions

5.1. The work schedule of a construction control engineer is determined in accordance with the internal labor regulations established by the Company.

5.2. In connection with the production need, the construction control engineer is obliged to travel to business trips(including local values).

Acquainted with the instructions ______ / ____________ / "__" _______ 20__